Noisy lift: identifying the cause before intervening
Sonalyze · 16 November 2026 · reading time : 3 min
Occupants hear the lift at night; the technician, during the day, finds nothing wrong. This mismatch is the starting point of most lift noise cases.
A noise that is rarely constant
A screech when starting, a knock when stopping, a hum at full load: these noises depend on the direction of travel, the load and the temperature. They may only appear on some of the journeys.
Record every journey
A continuous measurement over 24 hours or more covers several hundred journeys. Abnormal events stand out because they recur, and their timing can be matched with the lift's operating data.
Look at frequencies, not just the level
- A steady low-frequency component points to the machinery or its mounting.
- A short, high-pitched noise when starting suggests friction.
- A noise that follows the speed of the car points to the guide system.
An example
In a pilot carried out with a lift company in a residential building, 24 hours of measurement and around 400 journeys revealed a recurring component at 100 Hz, a harmonic at 500 Hz and a screech lasting a few seconds when starting, between 80 and 85 dB.
Check the effect of the intervention
The same measurement, repeated after a part has been replaced, shows what has changed. It is also the simplest way to present the result to the client and the occupants.