Skip to content
Sonalyze

DPS and DPE: what is the difference?

Sonalyze · 14 November 2026 · reading time : 3 min

The two acronyms look alike and both end with a rating from A to G. The comparison stops there: one is required by law and calculates consumption, the other is chosen and measures what you hear.

What each one assesses

  • DPE, Diagnostic de Performance Énergétique (energy performance certificate): the home's energy consumption and greenhouse gas emissions.
  • DPS, Diagnostic de Performance Sonore (Sound Performance Diagnosis): the actual sound level in the home over a day and a night, and where the noise comes from.

Mandatory or voluntary

The DPE must be provided for a sale or a rental. The DPS is voluntary: no regulation requires it. A seller, a landlord, a buyer or an occupant can request it to get information that the usual diagnoses do not give.

Calculated or measured

The DPE is based on a calculation from the building's characteristics. The DPS is based on a measurement: Sona boxes stay in the main rooms for 24 hours or more. The sound is not kept; only the levels and the type of noise are recorded.

What the DPS report contains

  • A sound rating from A to G for the home.
  • The noise level hour by hour, by day and by night.
  • The breakdown of noise by source: traffic, neighbours, equipment, voices.
  • Suggested works suited to the noise recorded.

What it is for

The report helps you decide before buying or renting, highlight a quiet home, target works or document a nuisance. It is evidence that an independent acoustician can review. It complements the diagnoses provided during a transaction, without replacing them.

Sources

This guide gives general information about the situation in France and does not replace legal or technical advice suited to your situation.

Read also