Skip to content
Sonalyze

Acoustic certificate and actual noise: what each one says about a home

Sonalyze · 18 November 2026 · reading time : 3 min

Since 2013, new residential buildings in France have been subject to a certificate showing that the acoustic regulations have been taken into account. It concerns the building. Occupants' questions concern its use.

What the certificate covers

It concerns residential buildings whose building permit was applied for from 1 January 2013. The project owner provides it when the works are completed (decree of 30 May 2011, order of 27 November 2012).

It is based on checks during design and construction. For developments of at least 10 homes, it is also based on acoustic measurements at the end of the works.

What the regulations check

The decree of 30 June 1999 sets minimum requirements: insulation between homes, impact noise, noise from the building's equipment, insulation against outdoor noise, treatment of common areas.

What it does not say

  • The noise level in the occupied home, by day and by night.
  • How much of what you hear comes from the street, the neighbours and the equipment.
  • How things change over time, once the equipment is in service.
  • The situation of older homes, outside the scope of the certificate.

A large-scale indicator of use

Continuous measurement, with the same protocol from one home to the next, gives comparable results across dozens or hundreds of homes. It does not require an acoustician to be present for each installation.

The role of each tool

  • Regulatory checks are still carried out with standardised measurements and appropriate equipment.
  • Continuous measurement is a pre-diagnosis: it identifies the homes that deserve a closer look.
  • The boxes are not certified sound level meters, and the DPS is a voluntary step.

Sources

This guide gives general information about the situation in France and does not replace legal or technical advice suited to your situation.

Read also