Noise on board vehicles: what can be measured in service
Sonalyze · 18 November 2026 · reading time : 3 min
On-board noise is assessed in tests, under controlled conditions. In service, it depends on the track or road, the speed, wear and load. That is where feedback from drivers and passengers comes from.
The framework for drivers
For employees, the French Labour Code sets three thresholds for daily noise exposure, over 8 hours.
- 80 dB(A): the employer provides hearing protection, informs and trains.
- 85 dB(A): the employer sets up a noise reduction programme and marks noisy areas.
- 87 dB(A): limit value, taking hearing protection into account, not to be exceeded.
Regulatory measurement and monitoring
Assessing employees' exposure requires a standardised measurement with appropriate equipment. Sona boxes are not certified sound level meters: they are not used to establish compliance.
They answer another question: what happens on board, over time, on the equipment actually in service?
What a measurement in service shows
- The sound level over a journey, a shift or a week.
- When it rises: section of route, speed, doors opening, air conditioning.
- The type of noise recorded: rolling, engine, ventilation, announcements, voices.
- Differences between vehicles of the same series.
What it is for
- Establishing the facts behind feedback from a driver or a passenger.
- Spotting a vehicle that departs from the others, before a breakdown.
- Comparing before and after a maintenance operation.
- Deciding where a regulatory measurement is useful.
In practice
The box runs on battery and is set up on board in a few minutes. It analyses the sound on the spot and does not keep the audio. No conversation is recorded: only the levels and the type of noise are sent.
Sources
This guide gives general information about the situation in France and does not replace legal or technical advice suited to your situation.